2014 New | MPPT solar controllers | I series solar controllers | S series solar controllers | C Sereis Solar Controllers | V Series Solar Controllers | G Z Sereis Solar Controller
WaterProof Solar Controllers |
48V Solar Controllers | Dual Battery Controllers | Solar Controllers With LED drivers | Accessories | User Manual
Oversea Warehouse - Australia - United States - United Kingdom
I Series Solar Charge Controllers
 |
 |
 |
 |
|
 |
|
Only For off-Grid PV Solar System.
For 12V Pv System: 150W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 24V Pv System: 300W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
This solar charge controller is designed for solar DC power supply system. MCU and professional software are applied as the control center to fulfill intelligent system control. LED will indicate the working state. It`s easy to turn on and turn off output through manual operation. And there are two optional voltage modes, 12V and 24V.
|
 |
|
 |
Package including:
1.1PCS Solar Contorller
2.1PCS User Manual
Protection:
Overcharging protection
Can be used for all panels
Overdischarging protection
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments
Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge
Features:
MCU and professional software are used as the control center to fulfill intelligent system control, along with PWM high efficiency charging way. Boost, recovery and float charging auto work for battery long-life and with temperature compensation. It has high accuracy over discharging control by the discharging rate, over-discharging control voltage modified by the battery discharging rate curve. Our controller has the function of self protection from overload, outside and inside short circuit, reverse connection, thunder and lightning, PV panel reverse current, over charging and discharging etc. During the short circuit and overload protection, no any component will be damaged and need change, including fuse. The LED will indicate the working state of the system in charging, overcharging power full, power low, over-discharging, over load, out short circuit, load on/off and etc. Our products meet the industrial production standard with wide temperature running area -35¡æ to +55¡æ.
Rating:
10I: 12 Volt or 12/24 Volt auto work, 10 Amps (for PV and load)
20I: 12 Volt or 12/24 Volt auto work, 20 Amps (for PV and load)
Equalisation voltage: 14.8Volt
High voltage disconnect(HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect(LVD) 11.1Volt
Low voltage reconnect(LVR): 12.6Volt
Self-consumption: 6mA maximum
Temperature compensation: -30mV/¡æ/12V
Terminals: for wire sizes to 6mm2
Temperature: -35¡æ to +55¡æ
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.
Lighting control Option
1.Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.The LED is on,which confirmed you have selected the right one.
2.The controller requires 10 munites of countinuous transiton values before it starts to work.These constraints avoid false transitions due to lighting or dark storm clouds.
3.10 minutes off before the controller start to work
4.A brief description follows belows:
| Number 0: | Dusk-to-Dawn,light is on all night |
| Number 1: | Light is turn on after sundown for 1 hour. |
| Number 2: | Light is turn on after sundown for 2 hour. |
| Number 3: | Light is turn on after sundown for 3 hour. |
| Number 4: | Light is turn on after sundown for 4 hour. |
| Number 5: | Light is turn on after sundown for 5 hour. |
| Number 6: | Light is turn on after sundown for 6 hour. |
| Number 7: | Light is turn on after sundown for 7 hour. |
| Number 8: | Light is turn on after sundown for 8 hour. |
| Number 9: | Light is turn on after sundown for 9 hour. |
| Number 0: | Light is turn on after sundown for 10 hour. |
| Number 1.: | Light is turn on after sundown for 11 hour. |
| Number 2.: | Light is turn on after sundown for 12 hour. |
| Number 3.: | Light is turn on after sundown for 13 hour. |
| Number 4.: | Light is turn on after sundown for 14 hour. |
| Number 5.: | Light is turn on after sundown for 15 hour. |
| Number 6.: | Lights remain turn off ,ON/OFF mode |
| Number 7.: | Test Mode,lights on after it dects no light,lights off after it defects light. |
Only For off-Grid PV Solar System.
For 10A 12V Pv System: 150W Solar Panel,12V Lead-acid Battery,21V for Max input Voltage
For 10A 24V Pv System: 300W Solar Panel,24V Lead-acid Battery,42V for Max input Voltage
|
 |
|
 |
Package including:
1.1PCS 10A Solar Contorller
2.1PCS User Manual
Protection:
Overcharging protection
Can be used for all panels
Overdischarging protection
Short and Open Circuit protection
Full specification available if required
Fail Safe and cannot be damaged by accidental wiring mistakes
Advanced design with simple plug and play technology. No need for complicated adjustments
Full LED status indication: State of Charge(SOC) Red-Flat Battery: Amber-Low charge: Green- good charge: Green Flashing- Full Charge
Features:
¡ôMicrocontroller digital accuracy
¡ôPWM charge mode & State of Charge(SOC)
¡ôFully automatic operation & Electronic protections
¡ôDetects day and night using the PV array, timer setting
¡ôDouble digital LED display, numbers equal to timer setting
¡ôTemperature compensation, with inside temperature sensor
¡ôBig terminals, big distance between terminals
Rating:
10I: 12 Volt or 12/24 Volt auto work, 10 Amps (for PV and load)
Equalisation voltage: 14.8Volt
High voltage disconnect(HVD): 14.4Volt
Float voltage: 13.6Volt
Low voltage disconnect(LVD) 11.1Volt
Low voltage reconnect(LVR): 12.6Volt
Self-consumption: 6mA maximum
Temperature compensation: -30mV/¡æ/12V
Terminals: for wire sizes to 6mm2
Temperature: -35¡æ to +55¡æ
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.
Lighting control Option
1.Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.The LED is on,which confirmed you have selected the right one.
2.The controller requires 10 munites of countinuous transiton values before it starts to work.These constraints avoid false transitions due to lighting or dark storm clouds.
3.10 minutes off before the controller start to work
4.A brief description follows belows:
| Number 0: | Dusk-to-Dawn,light is on all night |
| Number 1: | Light is turn on after sundown for 1 hour. |
| Number 2: | Light is turn on after sundown for 2 hour. |
| Number 3: | Light is turn on after sundown for 3 hour. |
| Number 4: | Light is turn on after sundown for 4 hour. |
| Number 5: | Light is turn on after sundown for 5 hour. |
| Number 6: | Light is turn on after sundown for 6 hour. |
| Number 7: | Light is turn on after sundown for 7 hour. |
| Number 8: | Light is turn on after sundown for 8 hour. |
| Number 9: | Light is turn on after sundown for 9 hour. |
| Number 0: | Light is turn on after sundown for 10 hour. |
| Number 1.: | Light is turn on after sundown for 11 hour. |
| Number 2.: | Light is turn on after sundown for 12 hour. |
| Number 3.: | Light is turn on after sundown for 13 hour. |
| Number 4.: | Light is turn on after sundown for 14 hour. |
| Number 5.: | Light is turn on after sundown for 15 hour. |
| Number 6.: | Lights remain turn off ,ON/OFF mode |
| Number 7.: | Test Mode,lights on after it dects no light,lights off after it defects light. |
20I 20A Solar Light Charge Controller 12V 24V auto switch
This items is just for off-grid Solar PV system.
For 12V PV system: 21V for Max input,300W Solar Panel.
For 24V PV system :42V for Max input,600W Solar Panel.
Brand New PWM 20A Solar Charge Controller Panel Regulator 12V 24V The Solar lighting Controller for solar system with automatic lighting control and time functions. The Solar Controller is designed with a microcontroller for automatic lighting control functions. Proven reliability Precise lighting controller PWM battery charging Microcontroller digital accuracy Fully automatic operation 16 field adjustable lighting control options Manual test capability Detects day and night using the PV array Suitable for all 12V /24V lamps Suitable for Seal lead acid battery Temperature compensation
|
 |
|
 |
 |
 |
Features:
Microcontroller digital accuracy
PWM Charge mode
State of charge (SOC)
Temperature compensation with external temperature sensor
Detects day and night using the PV array
Big terminals and big distance between terminals
Functions:
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
20I Data Sheet:
20I series: 12 VOLT or 12/24 VOLT auto work, 20 AMPS (for PV and load)
Equalization voltage: 14.8 Volt
Boost voltage: 14.4 Volt
Float voltage: 13.6 Volt
Low voltage disconnect (LVD) 11.10 Volt
Low voltages reconnect (LVR): 12.6 Volt
Temperature compensation: -30mv/¡æ/12V
Self-consumption: 6mA maximum
Terminals: for wire sizes to 2.5mm^2
Temperature: -35¡æ to +55¡æ
Display:
4 LED indicators
PV: Green ¨Ccharging
Battery: Green-Yellow-Red
Load: Red ¨Coutput on
Red slow flashing& blinking shows mistakes
The fourth double LED shows timers
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.
Lighting control Option
1.Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.The LED is on,which confirmed you have selected the right one.
2.The controller requires 10 munites of countinuous transiton values before it starts to work.These constraints avoid false transitions due to lighting or dark storm clouds.
3.10 minutes off before the controller start to work
4.A brief description follows belows:
| Number 0: | Dusk-to-Dawn,light is on all night |
| Number 1: | Light is turn on after sundown for 1 hour. |
| Number 2: | Light is turn on after sundown for 2 hour. |
| Number 3: | Light is turn on after sundown for 3 hour. |
| Number 4: | Light is turn on after sundown for 4 hour. |
| Number 5: | Light is turn on after sundown for 5 hour. |
| Number 6: | Light is turn on after sundown for 6 hour. |
| Number 7: | Light is turn on after sundown for 7 hour. |
| Number 8: | Light is turn on after sundown for 8 hour. |
| Number 9: | Light is turn on after sundown for 9 hour. |
| Number 0: | Light is turn on after sundown for 10 hour. |
| Number 1.: | Light is turn on after sundown for 11 hour. |
| Number 2.: | Light is turn on after sundown for 12 hour. |
| Number 3.: | Light is turn on after sundown for 13 hour. |
| Number 4.: | Light is turn on after sundown for 14 hour. |
| Number 5.: | Light is turn on after sundown for 15 hour. |
| Number 6.: | Lights remain turn off ,ON/OFF mode |
| Number 7.: | Test Mode,lights on after it dects no light,lights off after it defects light. |
This items is just for off-grid Solar PV system.
For 12V PV system: 21V for Max input,4500W Solar Panel.
For 24V PV system :42V for Max input,900W Solar Panel.
Brand New PWM 30A Solar Charge Controller Panel Regulator 12V 24V The Solar lighting Controller for solar system with automatic lighting control and time functions. The Solar Controller is designed with a microcontroller for automatic lighting control functions. Proven reliability Precise lighting controller PWM battery charging Microcontroller digital accuracy Fully automatic operation 16 field adjustable lighting control options Manual test capability Detects day and night using the PV array Suitable for all 12V /24V lamps Suitable for Seal lead acid battery Temperature compensation
|
|
|
|
|
|
Features:
Microcontroller digital accuracy
PWM Charge mode
State of charge (SOC)
Temperature compensation with external temperature sensor
Detects day and night using the PV array
Big terminals and big distance between terminals
Functions:
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
Display:
4 LED indicators
PV: Green ¨Ccharging
Battery: Green-Yellow-Red
Load: Red ¨Coutput on
Red slow flashing& blinking shows mistakes
The fourth double LED shows timers
30I Data Sheet:
30I series: 12 VOLT or 12/24 VOLT auto work, 30 AMPS (for PV and load)
Equalization voltage: 14.8 Volt
Boost voltage: 14.4 Volt
Float voltage: 13.6 Volt
Low voltage disconnect (LVD) 11.10 Volt
Low voltages reconnect (LVR): 12.6 Volt
Temperature compensation: -30mv/¡æ/12V
Self-consumption: 6mA maximum
Terminals: for wire sizes to 2.5mm^2
Temperature: -35¡æ to +55¡æ
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-15 hours.
Lighting control Option
1.Press the power switch for 5 seconds and select the desired LIGHTING CONTROL option.The LED is on,which confirmed you have selected the right one.
2.The controller requires 10 munites of countinuous transiton values before it starts to work.These constraints avoid false transitions due to lighting or dark storm clouds.
3.10 minutes off before the controller start to work
4.A brief description follows belows:
| Number 0: | Dusk-to-Dawn,light is on all night |
| Number 1: | Light is turn on after sundown for 1 hour. |
| Number 2: | Light is turn on after sundown for 2 hour. |
| Number 3: | Light is turn on after sundown for 3 hour. |
| Number 4: | Light is turn on after sundown for 4 hour. |
| Number 5: | Light is turn on after sundown for 5 hour. |
| Number 6: | Light is turn on after sundown for 6 hour. |
| Number 7: | Light is turn on after sundown for 7 hour. |
| Number 8: | Light is turn on after sundown for 8 hour. |
| Number 9: | Light is turn on after sundown for 9 hour. |
| Number 0: | Light is turn on after sundown for 10 hour. |
| Number 1.: | Light is turn on after sundown for 11 hour. |
| Number 2.: | Light is turn on after sundown for 12 hour. |
| Number 3.: | Light is turn on after sundown for 13 hour. |
| Number 4.: | Light is turn on after sundown for 14 hour. |
| Number 5.: | Light is turn on after sundown for 15 hour. |
| Number 6.: | Lights remain turn off ,ON/OFF mode |
| Number 7.: | Test Mode,lights on after it dects no light,lights off after it defects light. |
40I 40A Solar Charge Controller with light and timer controller 12V 24V
This items is just for off-grid Solar PV system.
For 12V PV system: 30V for Max input,500W Solar Panel.
For 24V PV system :50V for Max input,1000W Solar Panel.
Ideal for Seal lead acid battery
Danger of explosion due to improper handling of batteries!Corrosive hazard by leaking battery acid!
|
 |
|
 |
 |
 |
Solar Modules generated power from light incidence.Even by low light incidence slolar modules carry the full voltage.Therefore,work cautiously and avoid sparking during all work.
Brand New PWM 40A Solar Charge Controller Panel Regulator 12V 24V The Solar lighting Controller for solar system with automatic lighting control and time functions. The Solar Controller is designed with a microcontroller for automatic lighting control functions. Proven reliability Precise lighting controller PWM battery charging Microcontroller digital accuracy Fully automatic operation 16 field adjustable lighting control options Manual test capability Detects day and night using the PV array Suitable for all 12V /24V lamps Suitable for Seal lead acid battery,AGM,GEL Temperature compensation
Features:
Microcontroller digital accuracy
PWM Charge mode
State of charge (SOC)
Temperature compensation with external temperature sensor
Detects day and night using the PV array
Big terminals and big distance between terminals
Functions:
Short circuit protection
Reverse polarity protection
Reverse current protection at night
Over charging or discharging protection
Over load protection
System Indicator
1.Solar Indictor
off:without enough sun,charge off.
Fast flashing:Buck/equalize charge
Constant on:Acceptance charge
Slow Flashing:Float Charge
2.Battery indicator
Green: Battery Power is full
Orange:Battery power is middle
Red:Battery Power is low
Red Flashing:Battery over discharge
3.Consume indicator
Off:Controller ouput closed
ON:output normal
Slow flashing:Coninus over current
Fast Flahsing: Short Circuit
Data Sheet:
40A series: 12 VOLT or 12/24 VOLT auto work, 40 AMPS (for PV and load)
Over Load protection:
130%(maintain for 60 secs)
160%(maintain for 50 secs)
over-load (immediately shut down)
Equalization voltage: 14.8 Volt
Boost voltage: 14.2 Volt
Float voltage: 13.8 Volt
Low voltage disconnect (LVD) 11.20 Volt
Low voltages reconnect (LVR): 12.6 Volt
Temperature compensation: N/C
Self-consumption: 15mA maximum
Temperature: -35¡æ to +55¡æ
LED indicator:
Solar Panel LED:
Green ON when solar is charging Battery.
Green blink when the syetem over voltage
Battery LED:
Green ON when battery level in the right range
Green Slowly flashing when battery level full
Yellow ON when battery level low
RED ON when loads cut off.
LOAD LED:
RED ON when the output is on
RED slowly flashing when it`s over load
(the load amps is 1.24 times of rated current for 60 seconds,or the load amps is 1.5 times of rated current for 5 seconds.)
RED blink when the load is short -circuit.
This controller has Light and Timer control Function
Light control:When daylight starts to occur then the light source goes off. Meanwhile the Solar Panels will charge the batteries. when there is no sunlight the garden light will switch on.
Time control:There is an eight hours time control,that means it will go off when the Lights automatically switch off after 0-13 hours.
Lighting control Option
Press the setting button to activate the mode display,press the button for 3 seconds,and select the desired mode.
| Number 0: | Charge Without Load Output |
| Number 1: | Light off Open +1 Hour Delay. |
| Number 2: | Light off Open +2 Hour Delay. |
| Number 3: | Light off Open +3 Hour Delay. |
| Number 4: | Light off Open +4 Hour Delay. |
| Number 5: | Light off Open +5 Hour Delay. |
| Number 6: | Light off Open +6 Hour Delay. |
| Number 7: | Light off Open +7 Hour Delay. |
| Number 8: | Light off Open +8 Hour Delay. |
| Number 9: | Light off Open +9 Hour Delay. |
| Number 0.: | Light off Open +10 Hour Delay. |
| Number 1.: | Light off Open +11 Hour Delay. |
| Number 2.: | Light off Open +12 Hour Delay. |
| Number 3.: | Light off Open +13 Hour Delay. |
| Number H: | Open Load Manually |
| Number C: | Charge with load protection |
| Number L: | Dusk to Dawn Mode |
| Number D: | Debug Mode |
60I,80I 60A 80A controllers are a kind of intelligent, multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements.
|
 |
|
 |
 |
 |
 |
 |
Features:
Simple button operation
Intelligent PWM charge mode
Adjustable charge-discharge control parameters
Overload, Short Circuit Protection
Battery reverse-discharge protection
Battery reverse connection protection
Image of LCD graphic symbol
Automatic Identification System Voltage level
Automatic Temperature Compensation
Settable Operating mode of Load
Remote monitoring and control function (custom)
Battery Low Voltage Disconnection (LVD)
Accumulated function of charge and discharge Ampere hours
| Model | 60I |
80I |
| Rated Current | 60A |
80A |
| Rated Voltage | 12V/24V | |
| Maximum Voltage of solar panel | 50V | |
| Float Voltage | 13.7V/27.4V | |
| Low Voltage Disconnection | 10.7V/21.4V | |
| Low Voltage Reconnection | 12.6V/25.2V | |
| No load loss | <30mA | |
| loop voltage drop | <200mV | |
| Charging Mode | ¡¡PMW Mode | |
| Temperature Compensation | ¡¡-4mV/Cell/¡æ | |
Installation
£º
¢Ù Get ready for tools and cables. Advising you to matching the right cables. Ensure that the current density £¼4A/mm2 that is conductive to reducing the line voltage drop. Recommendation: 30A with 10mm2 cables. Check whether the installation sites compliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.
¢Ú Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.
¢Û As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.
¢Ü Put the external temperature sensor into the left of the controller (probe port). The temperature sensor should be placed at the similar space of the battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation.)
¢Ý If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to the host computer.
Demolition: To prevent accidents, please order the demolition of solar panels, battery and load disconnect with controller.
Note£ºBattery polarity will not damage the controller, but you will have a load equipment security risks.
Installtion cable area |
¡¡>3# AWG ( 25mm2 ) |
Operation temperature |
-20¡æ ~ 50¡æ |
storage temperature |
-30¡æ ~ 70¡æ |
Humidity requirement |
¡¡<90% , no condensation |
Size |
¡¡130mm*188mm*62mm |
Mounting hole spacing |
¡¡90 mm 178 mm -- 5 |
Weight |
700g |
Copyright© YSmart Technology Co.,Ltd .2009-2014 Powered by ChinaSolarRegulator.com