2014 New | MPPT solar controllers | I series solar controllers | S series solar controllers | C Sereis Solar Controllers | V Series Solar Controllers | G Z Sereis Solar Controller
WaterProof Solar Controllers | 48V Solar Controllers | Dual Battery Controllers | Solar Controllers With LED drivers | Accessories | User Manual

Oversea Warehouse - Australia - United States - United Kingdom

MPPT Solar Charge Controllers







 

MPPT-10,MPPT-20 10A 20A Solar Charge Controller MPPT



True MPPT,transformer coil inside.

mppt-10 solar controller,transformer oil inside

mppt-10 solar controller,transformer oil inside

mppt-10 solar controller,transformer oil inside


Compared with normal solar charge controller, this MPPT controller could increase 10%-30% electrical power using efficiency from solar panel.


Feature:
The most outstanding feature of Maximum Power Point Tracking controller is intelligent tracking input voltage from solar panel, which could let solar panel always working at Maximum Power Point of V-A curve. Compared with normal solar charge controller, this MPPT controller could increase 10%-30% electrical power using efficiency from solar panel.

Function:
MPPT 10A solar charge controller regulator is not only have above mentioned special function, at the same time including completely Protecting and Controlling functions:
Overcharge protection Over-discharge protection Battery Reverse Current Protection Overloading Protection
Short Circuit Protection Reverse Polarity Connection Protection

Package:
1.1xMPPT Solar Controller
2. 1x Users` manual

Thank you very much for selecting our product
This manual offers important information and suggestions with respect to installation, use and troubleshooting, etc. Please read this manual carefully before using the product and pay attention to the safety recommendations in it.

This MPPT controller is not only have above mentioned special function,at the same time including completely Protecting and Controlling functions:
Overcharge protection
Over discharge protection
Battery Reverse Current Protection
Overloading Protection
Short Circuit Protection
Reverse Polarity Connection Protection


Model

MPPT-10

MPPT-20

Rated voltage

DC£º12V / 24V / 48V

Max current

10A

15A,20A,

No load loss

¡Ü8mA/12V / 24V ¡Ü30mA/48V

Voltage drop

¡Ü300mV

Max voltage of solar panel

23V/12V£¬23V¡Á2/24V,23Vg¡Á4/48V

Full charge cut

14V/12V,¡Á2/24V,¡Á4/48V£¨25¡æ£©

Low voltage cut

10.5V/12V,¡Á2/24V,¡Á4/48V

Reconnected voltage

12.6V/12V,¡Á2/24V,¡Á4/48V

Temperature compensation

-3mV/cell.¡æ

Efficiency

95£¥¡«97£¥

Wire area

1¡«2A/ m©O

Electrical power using efficiency

Can increase 10¡«30©‡

Net Weight

0.55Kg

0.65Kg

Dimension

188¡Á93¡Á55mm

188¡Á118¡Á55mm



Form a complete set:

Solar Panel: 12V solar system should use 40pcs cells laminated solar panel. The maximum power point voltage is over 18V. 24V solar system should use 2pcs above mentioned solar panels. 48V solar system should use 4pcs above mentioned solar panels.
Conductor: The cable between solar panel with MPPT solar charge controller should be better calculated by 1Ampere per 1mm2.
Solar Charge Controller: We have 12V, 24V and 48V three kinds of MPPT solar charge controllers with 10A, 20A, (other specifications could be designed as customer special request). Fit for power of solar panels:
MPPT-20¡ª200Wp£¨12V£©, 40¡ª400Wp£¨24V£©, 80-800Wp (48V).
¡¡
Connection:

1.Connected the ¡°+¡±, ¡°-¡± poles of the battery to the controller (3, 4 from left) firmly and correctly. At this time the LOAD green LED is bright. If the LOAD green LED is not bright, it is indicate there is battery reverse polarity connection. Only LOAD green LED is bright, we could continue next step operation.
2.Connected the ¡°+¡±, ¡°-¡± poles of the solar panel to the controller (1,2 from the left) firmly and correctly.
3.Connected the ¡°+¡±, ¡°-¡± poles of the LOAD to
the controller (5,6 from the left) firmly and correctly.

Simply Measure Method:

For 12V system, measure the input voltage from solar panel with multimeter (terminal 1, 2 of controller), it is normal if the voltage of solar panel more than battery voltage 0.5-6V. Generally, the higher input voltage, the better charge efficiency. For 24v and 48V system, the input voltage will be much more higher than battery voltage
(Note: It is normal phenomenon the controller can not find Maximum Power Point within 10 minutes from system start.)

Indicator:

1.Load indicator, green, bright indicate there is output, Load could work, ¡°off¡± indicate there is not output, and Load can not work.
2.Low Voltage Indicator, red; bright indicate the voltage of the battery is low. Load could not normal working. This is normal phenomenon. When the battery voltage recover to 12.6V or (25.2v), the Load will be automatically working, at this time the indicator is off.
3.Charge Indicator, red, bright indicate the battery need to charge, flickering means float charging, off means charge has stop.

RESET Button:

Please notice the rated current of your controller, if there is short circuit or overload happened, the MPPT controller will close output. (Load indicator off, Low voltage indicator off.)
If you need the MPPT controller recover work, please check the reasons and clear out the fault firstly. Then put a small stick such as toothpick, ball-pen tip inside the RESET hole, and press RESET button will be OK.

Attention:

1.Please check the rated voltage of the solar panel, battery, and load are all the same with 12V or 24V or 48V.
2.Please pay attention to connection, do not connect the ¡°+¡± ¡°-¡± poles of solar panels and loads wrong.( Wrong connection will be burn your MPPT controller)
3.Battery must be connected earlier than solar panels and load. When take off the system, Solar Panels must be take down first, then cut off battery.

 

EMPPT-30 30A 12V 24V 48V Solar Charge Controller

Features
The product adopts DC/DC converting technology and MCU technology. It can adjust the working point of the solar panels array intelligently to make the solar panels array realize the maximum power output. When the external condition changes, eMPPT controller bases on the MCU theory to track the maximum working point of the solar panels, this can improve the using efficiency of the solar panels and decrease the solar generating cost. Compared with average solar charge controllers, eMPPT can improve the output efficiency of the solar panels by 5% to 30 %( the output increasing proportion affected by the factors such as the attribute of the solar panels, environmental temperature and lighting conditions). The product adopts in big screen lattice LCD, and uses the vivid icons to indicate the parameters. It has concise and vivid interface. The product is wall mounting installation. Please refer to chapter 2.1 for the installing dimensions.


Product functions

 

Functions

instruction

1

maximum power point tracking

Adopting DC/DC converting technology and MCU technology to realize the maximum output of the solar panels

2

battery reversed connection protection

Battery polarity connecting to the controller reversely (under the condition not connecting solar panels) will not cause damage to controller. It can work normally after connecting right.

3

Anti-battery reverse discharge

When solar panels voltage is less than battery voltage, the battery will not charge to the solar panels array.

4

Anti-solar panels reverse connection

Solar panels array polarity connecting to the controller reversely will not cause damage to controller. It can work normally after connecting right

5

three-stage charge control

Bulk Absorption Float

6

float charging voltage adjustable

The users can adjust the float charging voltage within a certain scope.

7

temperature compensation for float charging voltage

Referring to the current battery temperature, take 25¡æ as a benchmark, the controller will compensate the float charging voltage by -4mV/Cell/¡æ. For 12V battery, compensation voltage U=(t-25)*6*(-0.004)V£»For 24V battery, compensation voltage U=(t-25)*12*(-0.004)V£»For 48V battery, compensation voltage U=(t-25)*24*(-0.004)V

8

Elevating charging voltage adjustable

The users can adjust the elevating charging voltage within a certain scope

9

solar panel input deviated from maximum power point

When solar panel input power is over the acceptable power for the controller, the controller will make the solar panel work deviated from the maximum power to prevent itself damaged. So the controller charges the battery by rated current.

10

internal overheating protection

When the internal temperature sensor detects excessive temperature, the controller will stop working to prevent it being damaged. It will resume working again when the internal temperature drops to a certain degree.

11

temperature controlling fan

When the internal temperature sensor detects the temperature exceeding a certain degree, the controller will start the cooling fan until the temperature drops to a certain degree.

12

panel over voltage protection

When the input voltage of the solar panels exceeds the rated voltage, the controller will start protection automatically and stop working until the input voltage resumes back to the normal scope.

13

remote controlling function

This optional function can make it possible to view and set the parameters of the system on PC.



Technical parameters

model eMPPT3024Z eMPPT3048
input solar panel input voltage scope ¡Ü70V ¡Ü130V
maximum power point voltage tracking scope 12V~70V£¨12V£© 48V~130V
24V~70V£¨24V£©
solar panel input route 1 route 1 route
output rated working voltage 12V/24V auto switch 48V
maximum charging current 30A 30A
no load loss ¡Ü45mA ¡Ü45mA
charging mode £¨Bulk Absorption Float£©
float charging voltage 27.6V£¨adjustable£© 55.2V£¨adjustable£©
temperature compensation for float charging voltage -4mV/cell/¡æ -4mV/cell/¡æ
absorption charging voltage 28.8V£¨adjustable£© 57.6V£¨adjustable£©
temperature scope -20¡æ¡«+70¡æ -20¡æ¡«+70¡æ
others protection functions ¢Ùbattery reverse connection function
¢Úbattery reverse discharging function
¢Ûsolar panel reverse connection function
¢Üsolar panel input over voltage protection
¢Ýradiator overheat protection
¢Þinput over power deviated from maximum power point
cooling way thermostat active cooling
optional function £¨RS485 or RS232£©remote controlling function
working temperature scope -10¡æ¡«+50¡æ
working altitude ¡Ü3000m
working humidity scope 0¡«90%£¬ no condensation
volume 380mm*150mm*100mm
weight 2.5 Kg 2.6 Kg
storage temperature scope -30¡æ¡«+80¡æ


Installing dimension

We suggest installing the controller on the vertical wall, and ensure there is the space over 10cm around the controller for heat emission.

1. We suggest the user to use the sheathed cable with the cross-sectional area over 6mm2.
2. We suggest installing breaker and fuse on the negative loop of battery and solar panels.
3. Set the controller¡¯s ground terminal to reliably connect to the system ground bus.
4. The capacity of the controller internal over voltage absorption is limited. Please make sure connect the solar panel to the controller after connecting to the mine exchange line box.

Wire & tool preparation
¢ÅPrepare 6 mm2 black and red sheathed cables, each one roll. Prepare several copper noses of§¶6-6mm2 since controller adopts in§¶6 terminals
¢ÆHydraulic pliers(for crimping copper nose and cable) and 6 mm2 die, one couple, 10mm wrench, 2 sets, Phillips screwdriver, 1 set, cutting pliers, 1set
¢ÇCut the cables according to the cabling requirement. Use hydraulic and die to connect the copper nose and cables tightly, and prepare all the cables well.


Installing process
¢ÅIf breaker is installed in the battery loop, please make the breaker open. If fuse is installed, please take out the fuse to prevent the phenomena of contact ignition.
¢ÆUse the prepared cables to connect the +,- polarity of battery to the battery terminals on the controller. Please make sure the connecting of the polarity is correct.
¢ÇUse the prepared cables to connect the solar panel output of the main convergence box to the solar panes terminals on the controller. Please make sure the connecting of the polarity is correct.
¢ÈUse the prepared cables to connect the ground terminals to the ground box of the system.
¢É Insert the temperature sensor to the right place on the controller.
¢ÊClose the breaker of the battery loop or insert the fuse of the battery loop, if the controller LCD screen starts to show the signal, the controller will start to work. And if the LCD has no signal, please check whether the connecting of the polarity is correct, whether the connecting cables is in good condition, whether the breaker is closed, whether the fuse is inserter. Wait until the LCD has signal, and then go to next step.
¢ËClose the breaker of the solar panels loop or insert the fuse of the solar panels loop, then the controller LCD screen will show the solar panels voltage. If the LCD shows the voltage is 0V, please check whether the breaker in the solar panels loop is closed.

 

EMPPT-60 60A 12V 24V 48V Solar Charge Controller MPPT

Features
The product adopts DC/DC converting technology and MCU technology. It can adjust the working point of the solar panels array intelligently to make the solar panels array realize the maximum power output. When the external condition changes, eMPPT controller bases on the MCU theory to track the maximum working point of the solar panels, this can improve the using efficiency of the solar panels and decrease the solar generating cost. Compared with average solar charge controllers, eMPPT can improve the output efficiency of the solar panels by 5% to 30 %( the output increasing proportion affected by the factors such as the attribute of the solar panels, environmental temperature and lighting conditions). The product adopts in big screen lattice LCD, and uses the vivid icons to indicate the parameters. It has concise and vivid interface. The product is wall mounting installation. Please refer to chapter 2.1 for the installing dimensions.


Product functions

 

Functions

instruction

1

maximum power point tracking

Adopting DC/DC converting technology and MCU technology to realize the maximum output of the solar panels

2

battery reversed connection protection

Battery polarity connecting to the controller reversely (under the condition not connecting solar panels) will not cause damage to controller. It can work normally after connecting right.

3

Anti-battery reverse discharge

When solar panels voltage is less than battery voltage, the battery will not charge to the solar panels array.

4

Anti-solar panels reverse connection

Solar panels array polarity connecting to the controller reversely will not cause damage to controller. It can work normally after connecting right

5

three-stage charge control

Bulk Absorption Float

6

float charging voltage adjustable

The users can adjust the float charging voltage within a certain scope.

7

temperature compensation for float charging voltage

Referring to the current battery temperature, take 25¡æ as a benchmark, the controller will compensate the float charging voltage by -4mV/Cell/¡æ. For 12V battery, compensation voltage U=(t-25)*6*(-0.004)V£»For 24V battery, compensation voltage U=(t-25)*12*(-0.004)V£»For 48V battery, compensation voltage U=(t-25)*24*(-0.004)V

8

Elevating charging voltage adjustable

The users can adjust the elevating charging voltage within a certain scope

9

solar panel input deviated from maximum power point

When solar panel input power is over the acceptable power for the controller, the controller will make the solar panel work deviated from the maximum power to prevent itself damaged. So the controller charges the battery by rated current.

10

internal overheating protection

When the internal temperature sensor detects excessive temperature, the controller will stop working to prevent it being damaged. It will resume working again when the internal temperature drops to a certain degree.

11

temperature controlling fan

When the internal temperature sensor detects the temperature exceeding a certain degree, the controller will start the cooling fan until the temperature drops to a certain degree.

12

panel over voltage protection

When the input voltage of the solar panels exceeds the rated voltage, the controller will start protection automatically and stop working until the input voltage resumes back to the normal scope.

13

remote controlling function

This optional function can make it possible to view and set the parameters of the system on PC.



Technical parameters

model eMPPT6024Z eMPPT6048
input solar panel input voltage scope ¡Ü70V ¡Ü130V
maximum power point voltage tracking scope 12V~70V£¨12V£© 48V~130V
24V~70V£¨24V£©
solar panel input route 1 route 1 route
output rated working voltage 12V/24V auto switch 48V
maximum charging current 30A 30A
no load loss ¡Ü45mA ¡Ü45mA
charging mode £¨Bulk Absorption Float£©
float charging voltage 27.6V£¨adjustable£© 55.2V£¨adjustable£©
temperature compensation for float charging voltage -4mV/cell/¡æ -4mV/cell/¡æ
absorption charging voltage 28.8V£¨adjustable£© 57.6V£¨adjustable£©
temperature scope -20¡æ¡«+70¡æ -20¡æ¡«+70¡æ
others protection functions ¢Ùbattery reverse connection function
¢Úbattery reverse discharging function
¢Ûsolar panel reverse connection function
¢Üsolar panel input over voltage protection
¢Ýradiator overheat protection
¢Þinput over power deviated from maximum power point
cooling way thermostat active cooling
optional function £¨RS485 or RS232£©remote controlling function
working temperature scope -10¡æ¡«+50¡æ
working altitude ¡Ü3000m
working humidity scope 0¡«90%£¬ no condensation
volume 380mm*150mm*100mm
weight 4.5 Kg 4.6 Kg
storage temperature scope -30¡æ¡«+80¡æ


Installing dimension

We suggest installing the controller on the vertical wall, and ensure there is the space over 10cm around the controller for heat emission.

1. We suggest the user to use the sheathed cable with the cross-sectional area over 6mm2.
2. We suggest installing breaker and fuse on the negative loop of battery and solar panels.
3. Set the controller¡¯s ground terminal to reliably connect to the system ground bus.
4. The capacity of the controller internal over voltage absorption is limited. Please make sure connect the solar panel to the controller after connecting to the mine exchange line box.

Wire & tool preparation
¢ÅPrepare 6 mm2 black and red sheathed cables, each one roll. Prepare several copper noses of§¶6-6mm2 since controller adopts in§¶6 terminals
¢ÆHydraulic pliers(for crimping copper nose and cable) and 6 mm2 die, one couple, 10mm wrench, 2 sets, Phillips screwdriver, 1 set, cutting pliers, 1set
¢ÇCut the cables according to the cabling requirement. Use hydraulic and die to connect the copper nose and cables tightly, and prepare all the cables well.


Installing process
¢ÅIf breaker is installed in the battery loop, please make the breaker open. If fuse is installed, please take out the fuse to prevent the phenomena of contact ignition.
¢ÆUse the prepared cables to connect the +,- polarity of battery to the battery terminals on the controller. Please make sure the connecting of the polarity is correct.
¢ÇUse the prepared cables to connect the solar panel output of the main convergence box to the solar panes terminals on the controller. Please make sure the connecting of the polarity is correct.
¢ÈUse the prepared cables to connect the ground terminals to the ground box of the system.
¢É Insert the temperature sensor to the right place on the controller.
¢ÊClose the breaker of the battery loop or insert the fuse of the battery loop, if the controller LCD screen starts to show the signal, the controller will start to work. And if the LCD has no signal, please check whether the connecting of the polarity is correct, whether the connecting cables is in good condition, whether the breaker is closed, whether the fuse is inserter. Wait until the LCD has signal, and then go to next step.
¢ËClose the breaker of the solar panels loop or insert the fuse of the solar panels loop, then the controller LCD screen will show the solar panels voltage. If the LCD shows the voltage is 0V, please check whether the breaker in the solar panels loop is closed.


Tracer A series MPPT solar charge controller
Tracer1210A,TRACER2210A,TRACER3210A,TRACER4210A

Tracer A series adopts common positive design and advanced MPPT control algorithm. The products can track the MPP point fast and accurately in any situation which will improve energy efficiency and obtain the maximum solar energy.

 

Features:
• Advanced MPPT technology
• High tracking efficiency no less than 99.5%
• Peak conversion efficiency of 98%
• Ultra-fast tracking speed
• Accurately recognizing and tracking of multiple power point
• Multi-function LCD displays system information intuitively
• User programmable for battery types, load control etc.
• 3-Stage charge with PWM output
• Common positive grounding design
• RS485 port with industrial standard MODBUS open architecture
• Fully programmable function via PC software or remote meter

Electronic Protections£º

• PV reverse polarity protection
• PV short circuit protection
• PV over current alarm protection
• Battery overcharge protection
• Battery over discharge protection
• Battery reverse polarity protection
• Load short circuit protection
• Load overload protection
• Controller overheating protection

Model

Tracer1210A

Tracer2210A

Tracer3210A

Tracer4210A

Nominal system voltage

12/24V auto work

Rated battery current

10A

20A

30A

40A

Rated load current

10A

20A

30A

40A

Max. PV open circuit voltage

100V(at minimum operating environment temperature)
92V(at 25¡æ environment temperature)

Battery input voltage range

8~32V

MPP voltage range VBAT+2V¡« 72V

Max. PV input power

130W (12V)

260W (12V)

390W (12V)

520W (12V)

260W (24V)

520W (24V)

780W (24V)

1040W (24V)

Equalize charging voltage

Sealed: 14.6V, Flooded: 14.8V

Boost charging voltage

Gel: 14.2V,Sealed: 14.4V,Flooded: 14.6

Float charging voltage

13.8V

Low voltage reconnect voltage

12.6V

Low voltage disconnect voltage

11.1V

Self-consumption

≤20mA/12V; ≤16mA/24V

Temp. compensation

-3mV/ ºC/2V(25 ºC)

Communication Port

RS485 / RJ45 interface

Working temperature

-25 ºC ¡«+45 ºC

Storage temperature

-35¡æ¡«+80¡æ

Enclosure

IP30

Overall dimension

172x139x44mm

220x154x52mm

228x164x55mm

252x180x63mm

Terminal

12AWG(4mm2)

6AWG(16mm2)

6AWG(16mm2)

6AWG(16mm2)

Net weight

0.6kg

1.1kg

1.2kg

1.9kg


Tracer BN series MPPT solar charge controller Negative controller)
Tracer1215BN,TRACER2215BN,TRACER3215BN,TRACER4215BN

New Tracer series is the second generation of MPPT controller. Compared with CLASSIC Tracer series, it has extensive communication ability. And the die-cast aluminum design ensures excellent heat dispersion.

 

Features:
¡¤Innovative MPPT technology
¡¤Peak conversion efficiency of 98%
¡¤High tracking efficiency up to 99%
¡¤Several seconds tracking speed
¡¤Die-cast aluminum design and nature cooling
¡¤Temperature compensation
¡¤Diversified load control to meet different requirements
¡¤Four battery type options: Sealed, Gel, Flooded, and USER
¡¤Intelligent lighting and timer control for solar lighting system
¡¤Energy statistics function
¡¤RS485 ports with MODBUS communication protocol
¡¤Optional PC monitoring software and remote meter for real-time monitoring and battery management parameter setting
¡¤Field upgradable firmware

Electronic Protections£º

¡¤PV short circuit protection
¡¤PV overvoltage alarm protection
¡¤PV current limiting protection
¡¤PV reverse polarity protection
¡¤Battery overcharge protection
¡¤Battery over discharge protection
¡¤Battery reverse polarity protection
¡¤Load overload protection
¡¤Load short circuit protection
¡¤Overheating protection

Model

Tracer1215BN

Tracer2215BN

Tracer3215BN

Tracer4215BN

Nominal system voltage

12/24V auto work

Rated battery current

10A

20A

30A

40A

Rated load current

10A

20A

20A

20A

Max. PV open circuit voltage

150V

Max. battery voltage

32V

Max. PV input power

130W (12V)

260W (12V)

390W (12V)

520W (12V)

260W (24V)

520W (24V)

780W (24V)

1040W (24V)

Equalize charging voltage

Sealed: 14.6V, Flooded: 14.8V,USER: 9~17V

Boost charging voltage

Gel: 14.2V,Sealed: 14.4V,Flooded: 14.6VUSER: 9~17V

Float charging voltage

Gel /Sealed /Flooded: 13.8V, USER: 9~17V

Low voltage reconnect voltage

Gel /Sealed /Flooded: 12.6V, USER: 9~17V

Low voltage disconnect voltage

Gel /Sealed /Flooded: 11.1V, USER: 9~17V

Self-consumption

¡Ü50mA(12V) ¡Ü27mA(24V)

Grounding

Common negative

Temp. compensation

-3mV/¡æ/2V

Communication Port

RS485 / RJ45 interface

Working temperature

-35¡æ¡«+55¡æ

Storage temperature

-35¡æ¡«+80¡æ

Humidity

¡Ü95% N.C.

Enclosure

IP30

Overall dimension

196x118x36mm

217x143x56mm

281x160x60mm

303x183x64mm

Terminal

4mm2

10mm2

16mm2

25mm2

Net weight

0.9kg

1.5kg

2.3kg

2.9kg

 

Tracer Series MPPT solar charge controller
TRACER1210,TRACER1215,TRACER2210,TRACER2215,TRACER3215,TRACER4210


Tracer is an advanced Maximum Power Point Tracking MPPTcontroller for off-grid photovoltaic (PV) systems. The controller provides higher efficiency up to 97% with lower power loss.

Features:
¡¤MPPT technology
¡¤Peak conversion efficiency of 97%
¡¤High Tracking efficiency of 99%
¡¤Several seconds tracking speed
¡¤4-Stage charge with PWM output
¡¤Nature convection cooling
¡¤Full power output in ambient temperature up to 45 ¡æ
¡¤Temperature compensation
¡¤Sealed, Gel and Flooded battery option
¡¤Widely used, automatically recognize day/night
¡¤Diversified load control
¡¤RJ45 interface &optional meter
¡¤2 years warranty
¡¤CE certificate

Electronic Protections£º
¡¤PV short circuit protection
¡¤PV reverse polarity protection
¡¤PV overvoltage alarm protection
¡¤PV over current protection
¡¤Battery overcharge protection
¡¤Battery over discharge protection
¡¤Battery reverse polarity protection
¡¤Load short circuit protection
¡¤Load overload protection

 

Model

Tracer-1210RN

Tracer-1215RN

Rated system voltage

12/24V auto work

Rated battery current

10A

Rated load current

10A

Max.battery voltage

32V

Max.PV open circuit voltage

100VDC

150VDC

Max.PV input power

12V 130W; 24V 260W

Self-consumption

<10mA£¨24V£©

Charge Circuit Voltage Drop

¡Ü0.26V

Discharge Circuit Voltage Drop

¡Ü0.15V

Communication

TTL232 / 8 pin RJ45

Temp.compensation

-5mV/¡æ/2V

Working temperature

-35¡æ¡«+55¡æ

Storage temperature range

-35¡æ¡«+80¡æ

Humidity

10%-90% NC

Enclosure

IP30

Altitude

¡Ü3000m

Dimension

156mm x 97mm x 68mm

Mounting holes

147mm x 60mm

Mounting hole size

¦µ5

Terminal

4mm2

Weight

0.55kg

 

Model

Tracer-2210RN

Tracer-2215RN

Rated system voltage

12/24V auto work

Rated battery current

20A

Rated load current

20A

Max.battery voltage

32V

Max.PV open circuit voltage

100VDC

150VDC

Max.PV input power

12V 260W£¬ 24V 520W

Self-consumption

<10mA£¨24V£©

Charge Circuit Voltage Drop

¡Ü0.26V

Discharge Circuit Voltage Drop

¡Ü0.15V

Communication

TTL232 / 8 pin RJ45

Temp.compensation

-5mV/¡æ/2V

Working temperature

-35¡æ¡«+55¡æ

Storage temperature range

-35¡æ¡«+80¡æ

Humidity

10%-90% NC

Enclosure

IP30

Altitude

¡Ü3000m

Dimension

169mm x 118mm x 83mm

Mounting holes

160mm x 80mm

Mounting hole size

¦µ5

Terminal

10mm2

Weight

0.95kg

 

Model

Tracer-3215RN

Rated system voltage

12/24V auto work

Rated battery current

30A

Rated load current

20A

Max.battery voltage

32V

Max.PV open circuit voltage

150VDC

Max.PV input power

12V 390W£¬ 24V 780W

Self-consumption

<10mA£¨24V£©

Charge Circuit Voltage Drop

¡Ü0.26V

Discharge Circuit Voltage Drop

¡Ü0.15V

Communication

TTL232 / 8 pin RJ45

Temp.compensation

-5mV/¡æ/2V

Working temperature

-35¡æ¡«+55¡æ

Storage temperature range

-35¡æ¡«+80¡æ

Humidity

10%-90% NC

Enclosure

IP30

Altitude

¡Ü3000m

Dimension

242mm x 169mm x 91mm

Mounting holes

180mm x 160mm

Mounting hole size

¦µ5

Terminal

25mm2

Weight

2kg

 

Model

Tracer-4210RN

Rated system voltage

12/24V auto work

Rated battery current

40A

Rated load current

20A

Max.battery voltage

32V

Max.PV open circuit voltage

100VDC

Max.PV input power

12V 500W£¬ 24V 1000W

Self-consumption

<10mA£¨24V£©

Charge Circuit Voltage Drop

¡Ü0.26V

Discharge Circuit Voltage Drop

¡Ü0.15V

Communication

TTL232 / 8 pin RJ45

Temp.compensation

-5mV/¡æ/2V

Working temperature

-35¡æ¡«+55¡æ

Storage temperature range

-35¡æ¡«+80¡æ

Humidity

10%-90% NC

Enclosure

IP30

Altitude

¡Ü3000m

Dimension

242mm x 169mm x 91mm

Mounting holes

180mm x 160mm

Mounting hole size

¦µ5

Terminal

25mm2

Weight

2.05kg

Itracer MPPT solar charge controller
Itracer3415ND,Iracer4415ND,Itracer6415ND

iTracer is an industrial grade product with advanced Maximum Power Point Tracking (MPPT) algorithm. It can deliver the maximum available power for charging batteries and charge a lower nominal voltage battery from a higher nominal voltage array.

 

Features£º
Advanced MPPT algorithm with the max. tracking efficiency of 99%
Multi-phase synchronous rectification technology realizing peak conversion efficiency 98%
Dual-core(ARM CPU+DSP) control architecture improves the system response speed and optimizes the performance of the system
Multiphase control technology, optimizes charging current smoothness, reduces ripple and improves the system efficiency
128*64 dot-matrix LCD intuitively displays data and state, 6 buttons combinations for easy operation
Four battery type options: Sealed, Gel, Flooded and User-defined
Energy statistics recording, it is convenient for users to view charging and discharging energy of each day, month, year and total value.
Diversified load control mode
Programmable battery management parameters
Built-in running data and event logging, max. 15 months
Extensive communication capabilities (RS232,RS485 with Modbus protocol, CAN Bus extendable)
PC software available for real time monitoring and parameter setting
Field upgradable firmware


Electronic Protections:
PV short circuit protection
PV overvoltage protection
PV over current protection
PV reverse polarity protection
Reverse current protection at night
Over temperature protection
Battery reverse polarity protection
Load overload protection
Load short circuit protection

Model

IT3415ND

IT4415ND

IT6415ND

Rated system voltage

12V/24V /36V/48V auto work

Rated battery current

30A

45A

60A

Rated load current

30A

45A

60A

Max. PV open circuit voltage

150V

Voltage range

8~72V

Max.PV input power

400W (12V)

600W (12V)

800W (12V)

800W (24V)

1200W (24V)

1600W (24V)

1200W (36V)

1800W (36V)

2400W (36V)

1600W (48V)

2400W (48V)

3200W (48V)

Self-consumption

1.4¡«2.2W

Equalize charging voltage

Sealed: 14.6V, Flooded: 14.8V, User-defined: 9~17V

Boost charging voltage

Gel: 14.2V, Sealed: 14.4V, Flooded: 14.6V,

User-defined: 9~17V

Float charging voltage

Gel /Sealed /Flooded: 13.8V, User-defined: 9~17V

Low voltage reconnect voltage

Gel /Sealed /Flooded: 12.6V, User-defined: 9~17V

Low voltage disconnect voltage

Gel /Sealed /Flooded: 11.1V, User-defined: 9~17V

Grounding

Common negative

Tracking efficiency

99%

Peak conversion efficiency

98%

Dimension

358x219x102mm

382x231x107mm

440x231x110mm

Terminal

25mm2

35mm2

35mm2

Net Weight

3.7kg

4.6kg

5.9kg

Working temperature

-25¡æ¡«+55¡æ

Storage temperature range

-30¡æ¡«+85¡æ

Humidity

95% NC

Enclosure

IP20

 

Etracer MPPT Solar Charge controller
ETRACER3415,ETRACER4415,ETRACER6415

eTracer is an advanced Maximum Power Point Tracking (MPPT) controller for off-grid photovoltaic (PV) systems up to 3KW. The controller features a smart tracking algorithm that maximizes the energy harvest from the PV by rapidly finding the solar array peak power point in all the weather condition.

 

Features£º

·12/24/36/48V auto work
·Advanced MPPT technology
·Several seconds tracking speed
·High Tracking efficiency of 99%
·Multiphase synchronous rectification technology
·Peak conversion efficiency of 98%
·DSP&ARM processors architecture ensures high speed and performance
·Gel, Sealed, Flooded battery option
·Max. 450 days data logging by connection to PC
·Multifunction LCD displays system data and status
·Three kinds of communication ports :RS232, CAN BUS and Ethernet
·Three stages charging optimizes battery performance
·Software update by users

Electronic Protections:

·PV short circuit protection
·PV reverse polarity protection
·PV overvoltage alarm protection
·PV over current protection
·Battery overcharge protection
·Battery over discharge protection
·Battery reverse polarity protection
·Overheating protection

Model

ET3415N

ET4415N

ET6415N

Rated system voltage

12V/24V /36V/48V auto work

Rated battery current

30A

45A

60A

Max. PV open circuit voltage

150V

Voltage range

8~72V

Max.PV input power

400W (12V)

600W (12V)

800W (12V)

800W (24V)

1200W (24V)

1600W (24V)

1200W (36V)

1800W (36V)

2400W (36V)

1600W (48V)

2400W (48V)

3200W (48V)

Self-consumption

1.4¡«2.2W

Grounding

Negative

Dimension

231x203x105mm

285x203x105mm

285x203x121mm

Terminal

35mm2

35mm2

35mm2

Net Weight

4.1kg

4.4kg

5.0kg

Working temperature

-25¡æ¡«+55¡æ

Storage temperature range

-30¡æ¡«+85¡æ

Humidity

10%-90% NC

Enclosure

IP20

Altitude

≤3000m

 

Fangpusun MPPT Solar Charge controller
MPPT 100/15D 15A 12V 24V Auto Solar Charge Controller with LCD Display

 

Untra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controller.

Load output

Over-discharge of the battery can be prevented by connecting all loads to the load output. The load output will disconnect the load when the battery has been discharged to a pre-set voltage.

Alternatively, an intelligent battery management algorithm can be chosen;see Battery Life.The load output is short circuit proof.

Some loads (especially inverters) can best be connected directly to the battery,and the inverter remotecontrol connected to the load output. A special interface cable may be needed,please see the manual.

Battery Life:intelligent battery management

When a solar charge controller is not able to recharge the battery to its full capacity within one day, the result is often that the battery will continually be cycled between a ‘partially charged’ state and the ‘end of discharge’ state. This mode of operation (no regular full recharge) will destroy a lead-acid battery within weeks or months.

The Battery Life algorithm will monitor the state of charge of the battery and,if needed, day by day slightly increase the load disconnect level (i.e. disconnect the load earlier) until the harvested solar energy is sufficient to recharge the battery to nearly the full 100%.From that point onwards the load disconnect level will be modulated so that a nearly 100% recharge is achieved about once every week.

Programmable battery charge algorithm Day/night timing and light dimming option

Only factory setting

Display

Graphical LCD display

Operation

Simple menu-driven operation

Programming by buttons

Certificate

Maximum Power Point Tracking

QQ20170801144841

¢ÙUpper curve:

Output current (I) of a solar panel as function of output voltage (V).

The maximum power point (MPP) is the point 

Pmax along the curve where the product I x V reaches its peak.

¢ÚLower curve:

Output power P=I x V as function of output voltage.

When using a PWM (not MPPT) controller the output voltage of the solar panel will be nearly equal to the voltage of the battery , and will be lower than Vmp.

Specification

Solar Charge Controller

MPPT  100/15D

System voltage 

12V/24V Auto

Maximum output current

15A

Maximum PV Power , 12V

200W

Maximum PV Power , 24V

400W

Maximum PV open cricuit Voltage

100V

Maximum efficiency

98%

Self-consumption

20mA

Charge voltage "absorption"

Default setting:14.4V/28.8V(adjustable)

Charge voltage 'float'

Default setting:13,8V/27,6V(adjustable)

Charge algorithm

multi-stage adaptive

Temperature compensation

-15mV/°C resp.-32mV/°C

Continuous / peak load current 

15A/50A

Low voltage load disconnect

11.1 V / 22.2 V or 11.8 V / 23.6V or Battery Life algorithm

Low voltage load reconnect

13.1V / 26.2V or 14V / 28V or Battery Life algorithm

Protection

Battery reverse polarity (fuse)/Oupt ut short circuit / Over temperature

Operating temperature 

-30 to + 60°C (full rated output up to 40°C)

Humidity

95%,non-condensing

Enclosure

Terminals(fin / single wire)

6mm2 /AWG10

Protection category

IP22 (connection area)

Weight

0.5kg

Dimensions(X x Y x Z)

136 x 98 x 55mm

Standards

Safety

EN/IEC 62109


 

Fangpusun MPPT Solar Charge controller
MPPT 100/30D 30A 12V 24V Auto Solar Charge Controller with LCD Display

MPPT 100/50D 50A 12V 24V Auto Solar Charge Controller with LCD Display

 

Untra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controller.

Advanced Maximum Power Point Detection in canse of partial shading conditions

If partial shading occurs,two or more maximum power points may be present on the power-voltage curve.Conventional MPPT’s tend to lock toalocal MPP,which may not be the optimum MPP.The innovative fangpusun algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan.Maximum efficiency exceeds 98%.Full output current up to 40¡æ£¨104ºF£©.

Flexible charge algorithm

Fully programmable charge algorithm(see the software page on out website),and eight preprogrammed algorithms,selectable with a rotagy switch(see manual for details)

Extensive electronic protection

Internal temperature sensor


Compensates absorption and float charge voltage for temperature

Display

Graphical LCD display

Operation

Simple menu-driven operation

Programming by buttons

Certificate

Maximum Power Point Tracking

QQ20170801144841

¢ÙUpper curve:

Output current (I) of a solar panel as function of output voltage (V).

The maximum power point (MPP) is the point 

Pmax along the curve where the product I x V reaches its peak.

¢ÚLower curve:

Output power P=I x V as function of output voltage.

When using a PWM (not MPPT) controller the output voltage of the solar panel will be nearly equal to the voltage of the battery , and will be lower than Vmp.

Specification

Solar Charge Controller

MPPT  100/30D MPPT  100/50D

System voltage 

12V/24V Auto

Maximum output current

30A 50A

Maximum PV Power , 12V

440W( MPPT range 15V to 80 V) 700W( MPPT range 15V to 70 V resp.95V )

Maximum PV Power , 24V

880W( MPPT range 15V to 80 V) 1400W( MPPT range 15V to 70 V resp.95V )

Maximum PV open cricuit Voltage

100V

Maximum efficiency

98%

Self-consumption

20mA

Charge voltage "absorption"

Default setting:14.4V/28.8V(adjustable)

Charge voltage 'float'

Default setting:13,8V/27,6V(adjustable)

Charge algorithm

multi-stage adaptive

Temperature compensation

-16mV/°C resp.-32mV/°C

Protection

Battery reverse polarity (fuse)/Oupt ut short circuit / Over temperature

Operating temperature 

-30 to + 60°C (full rated output up to 40°C)

Humidity

95%,non-condensing

Enclosure

Terminals(fin / single wire)

13 mm2 /AWG 6

Protection category

IP43(electronic components),IP22(connection area)

Weight

1.25

1.6kg

Dimensions(X x Y x Z)

186×125×83 mm

Standards

Safety

EN/IEC 62109

Fangpusun MPPT Solar Charge controller
MPPT 150/45D 45A 12V 24V 36v 48v Auto Solar Charge Controller with LCD Display

MPPT 150/60D 60A 12V 24V 36v 48v Auto Solar Charge Controller with LCD Display
MPPT 150/70D 70A 12V 24V 36v 48v Auto Solar Charge Controller with LCD Display

 

Untra-fast Maximum Power Point Tracking (MPPT)

Especially in case of a clouded sky, when light intensity is changing continuously, an ultra fast MPPT controller will improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controller.

Advanced Maximum Power Point Detection in canse of partial shading conditions

If partial shading occurs,two or more maximum power points may be present on the power-voltage curve.Conventional MPPT’s tend to lock toalocal MPP,which may not be the optimum MPP.The innovative fangpusun algorithm will always maximize energy harvest by locking to the optimum MPP.

Outstanding conversion efficiency

No cooling fan.Maximum efficiency exceeds 98%.Full output current up to 40¡æ£¨104ºF£©.

Flexible charge algorithm

Fully programmable charge algorithm(see the software page on out website),and eight preprogrammed algorithms,selectable with a rotagy switch(see manual for details)

Extensive electronic protection

Internal temperature sensor


Compensates absorption and float charge voltage for temperature

Display

Graphical LCD display

Operation

Simple menu-driven operation

Programming by buttons

Certificate

Maximum Power Point Tracking

QQ20170801144841

¢ÙUpper curve:

Output current (I) of a solar panel as function of output voltage (V).

The maximum power point (MPP) is the point 

Pmax along the curve where the product I x V reaches its peak.

¢ÚLower curve:

Output power P=I x V as function of output voltage.

When using a PWM (not MPPT) controller the output voltage of the solar panel will be nearly equal to the voltage of the battery , and will be lower than Vmp.

Specification

Solar Charge Controller

MPPT  150/45D MPPT  150/60D MPPT  150/70D

System voltage 

12V/24V Auto

Maximum output current

30A 60A 70A

Maximum PV Power , 12V

650W 860W 1000W

Maximum PV Power , 24V

1300W 1720W 2000W
Maximum PV Power , 48V 2600W 3440W 4000W

Maximum PV open cricuit Voltage

150V

Maximum efficiency

98%

Self-consumption

20mA

Charge voltage "absorption"

Default setting:14.4 / 28.8 / 43.2 / 57.6 V (adjustable)

Charge voltage 'float'

Default setting:13.8 / 27.6 / 41.4 / 55.2V(adjustable)

Charge algorithm

multi-stage adaptive

Temperature compensation

-16mV/°C resp.-32mV/°C

Protection

Battery reverse polarity (fuse)/Oupt ut short circuit / Over temperature

Operating temperature 

-30 to + 60°C (full rated output up to 40°C)

Humidity

95%,non-condensing

Paralel operation Yes(not synchronized)

Enclosure

Terminals(fin / single wire)

35 mm2 /AWG2

Protection category

IP43(electronic components),IP22(connection area)

Weight

3Kg

Dimensions(X x Y x Z)

Tr models:248×178×103 mm

Standards

Safety

IEC 62109-1-2010

 

Click hear to chat online

Copyright© YSmart Technology Co.,Ltd .2009-2014 Powered by ChinaSolarRegulator.com